tech
notes: These
hoses are used if you installing later style heat exchangers in
an earlier car. For example - if you are putting a 1600cc engine
into your 1963 Beetle than originally ran a 40hp engine, this
hose should work for you.
Be sure to measure your old hose or, if it is no longer there,
the ends on both the body and the heat exchanger and the length
between the two before ordering a new hose. Due to engine swaps
and other variances, the original size hose may no longer work
for your vehicle.
detailed
description: 60mm x
50mm (2.36" x 1.96")
length = approx 365mm (14.37")
