tech
notes: These fit over the master cylinder switches to
protect the wires and wire ends from the elements. While these
aren't original for the early single circuit master cylinders
and don't tend to fit well on them due to the their switches
being on the end of the master cylinder than the side, we feel
they are still better than exposed wires. One boot is required
per light switch.
The small end of the boot is not large enough for the wire ends,
just the wires as the ends were crimped on after they were
threaded through originally.
detailed
description: also called Brake Light Switch Boots
quality
issues: None noted outside of the poor fit on the early
master cylinders, which they are not designed for anyway.
alternate
part numbers: 411-539
111-525
411941539/2
Bughaus - 4606 E. 11th St. - Tulsa, OK 74112
918-834-4287
