tech
notes:
Beetle / Ghia Models with aftermarket dropped drum or disc brake
spindles: Aftermarket spindles are almost always based on later
ball joint spindles so the holes for the tie rod ends are
larger. If you are running these you will need to order
311415811C or 311415812C outer tie rod ends (your inners will
stay the same unless you pitman arm has changed). Bus Models
This will fit the left side inner on the adjustable tie
rod. If you have replaced both sides with adjustable tie rods,
then this will fit the inner of either. However, this does not
fit the end of the non-adjustable style tie rods as these ends
are not replaceable.
detailed
description: Fits left
outer. Has a left hand thread.
quality
issues: None
noted. Ocap makes a consistently high-quality product. If run
out of Ocap we may substitute it with either a tie rod end made
by Nakata or Meyle, both of whom make equally high-quality
products.
Alternate
part numbers: --
Bughaus - 4606 E. 11th St. - Tulsa, OK 74112
918-834-4287